For Your Home

Roll-On Insulation - that Saves You Money on Your Monthly Energy Bills

Nansulate® HomeProtect
Insulation & Mold Resistant Coatings
Do It Yourself - Available in Clear or White
The product that pays for itself fast!

Nansulate HomeProtect Insulation and Mold Resistant Coatings

Effective and affordable insulation for every room in your home. Nansulate® is applied like a paint, but is much more. It is a nanotechnology based coating which provides long-term insulation and mold resistance for your home.

Customers typically report 20%-40% energy savings

Only 51 cents per s.f.

Easy Application with brush, roller or paint sprayer.

Non-toxic, water-based & earth friendly

Improves air quality by protecting against mold and moisture

10 Reasons to Consider Nansulate® Home Insulation

Decrease heating and cooling costs - spend less each month on your energy bill
Insulation by means of low thermal conduction - Because Nansulate® has a low thermal conductivity (meaning that it doesn't transfer heat energy well), it can insulate in a thin layer and offers a versatile insulation that can be used on walls, celiings, ductwork, brick, wood, stucco and many other surfaces
Non-toxic, and safe for use in your home, low VOC
No special equipment needed to apply - spray on coating - Application instructions
Clear Coat allows an invisible layer over wood, drywall, pre-painted walls, cement, brick, and more
Long-term consistent protection - does not get infiltrated by moisture, dust, mold
Make your home safer - Residential insulation that also protects against surface growth of mold without use of harmful moldicides
Improve Air Quality - Nansulate® does not harbor infestion by mold, rodents, insects, or moisture - meaning that your family is safer and your home has better air quality.
Return on investment is generally seen in less than a year, as reported by our customers
Apply at your own speed - do One Room at A Time, and spread your application out to best suit your home insulation needs

Nansulate reduces thermal flow by 34.8 percent

Standard Test Method for Steady-State Thermal Performance of Building Assemblies
(UNI EN ISO 8990:1999 - similar to ASTM C236)
Results:
Thermal flow, measured in watts, through the wall section coated with Nansulate® was reduced by 34.80%

Thermal resistance (1/U), measured in m2*k*w1, of the wall section coated with Nansulate® was increased by 28.98%

Customer Example

ENERGY USE IN KILOWATT HOURS
(Customer in Tulsa Oklahoma)

Reduced Energy Use with Nansulate HomeProtect Coatings

Average Energy Savings - 42%

Click here to download this case study

------------------------------------------------------------------------------

Benfits of Nansulate® Home Protect Coatings:

Outstanding insulation properties for a thin film coating
Does not contain any potentially harmful anti-microbial additives or biocides
Resistant to existing molds as well as resistant to new molds
Easy Application with brush, roller or paint sprayer.
Non-hazardous, water-based
Color: Translucent finish (ClearCoat) and White Semi-Gloss Finish (White Interior)
It exhibits outstanding durability with excellent adhesion to fiberglass, pvc, wood, concrete, plastic and many more substrates.
Energy Savings - a cost effective way to save money on your energy & fuel bills.
Resists Mold and Moisture
Space Saving – each coat is applied at 3-5 wet mils; a full three-coat application will dry to 4.5-7.5 dry mils.
Easy Cleanup – soap and water
Green Building Product - low VOC paint
Low Installation Cost - approx. 44 cents per S.F.
Do it yourself – easily applied by maintenance crews or individuals.
Equally suited for Commercial and Home Insulation Use.

Nansulate® HomeProtect ClearCoathas a clear, matte finish, and can be applied to a variety of exterior and interior surfaces. HomeProtect is non-toxic and does not contain any potentially harmful anti-fungal agents. HomeProtect Clear Coat has a higher insulating ability than HomeProtect White.

Coverage Rate: 150 S.F. per gallon @ 3 coats (recommended coverage). Actual coverage rate may vary depending on surface texture

Dowload Application Instructions

Download Specification Sheet

HomeProtect White Interior Nansulate® HomeProtect White has a white, semi-gloss finish which can be applied to interior walls, ceilings and attics. HomeProtect is non-toxic and does not containt any potentially harmful anti-fungal agents. HomeProtect White can be tinted to your desired color.

Coverage Rate: 150 S.F. per gallon @ 3 coats (recommended coverage). Actual coverage rate may vary depending on surface texture

Download Application Instructions

Download Specification Sheet

Easily applied over pre-painted surfaces	Use on wood, stucco, drywall and more	Add an invisible thermal barrier to any home

*20%-40% based upon field studies, testing and customer feedback

Nansulate® is Patented technology protected by U.S. and international Patents.